How to Use Mtk Nvram Editor to Modify and Repair IMEI on MediaTek Devices
If you have a MediaTek device that has an invalid or corrupted IMEI number, you might face issues with your network connectivity, calls, and SMS. You might also get an error message like \"NVRAM WARNING: Err=0x10\" or \"NVRAM WARNING: Err=0x02\" on your device. This means that your NVRAM data, which stores your IMEI and other important information, is damaged or missing. To fix this problem, you need to use a tool called Mtk Nvram Editor.
Mtk Nvram Editor.rargolkesl
DOWNLOAD: https://walllowcopo.blogspot.com/?download=2tNDGN
What is Mtk Nvram Editor?
Mtk Nvram Editor is a tool that allows you to edit and restore your NVRAM data on MediaTek devices. It can help you to change or repair your IMEI number, as well as other parameters like WiFi MAC address, Bluetooth address, barcode, serial number, etc. It can also help you to backup and restore your NVRAM data in case of any emergency.
How to download and install Mtk Nvram Editor?
To download and install Mtk Nvram Editor on your PC, you need to follow these steps:
Download the Mtk Nvram Editor.rar file from this link: https://trello.com/c/PaVKEpCI/22-mtk-nvram-editorrargolkesl
Extract the rar file using WinRAR or 7-Zip software.
Open the extracted folder and double-click on the Mtk Nvram Editor.exe file to run the tool.
Grant the necessary permissions and follow the instructions on the screen to complete the installation.
Once you have installed Mtk Nvram Editor on your PC, you can use it to modify and repair your IMEI on your MediaTek device.
How to backup and restore your NVRAM data with Mtk Nvram Editor?
Before you modify or repair your IMEI or other NVRAM data, it is recommended that you backup your original NVRAM data in case something goes wrong. To backup and restore your NVRAM data with Mtk Nvram Editor, you need to follow these steps:
Connect your MediaTek device to your PC via USB cable and enable USB debugging mode on your device.
Launch Mtk Nvram Editor on your PC and click on the Backup button.
Select the folder where you want to save your NVRAM backup file and click OK.
Wait for the tool to read and backup your NVRAM data. You will see a message saying \"Backup completed\" when it is done.
To restore your NVRAM data, click on the Restore button and select the backup file that you want to restore.
Wait for the tool to write and restore your NVRAM data. You will see a message saying \"Restore completed\" when it is done.
Reboot your device and check if your IMEI and other NVRAM data are restored.
Note: You can also use other tools like SP Flash Tool, MTK Droid tools NVRAM, TWRP Recovery or Miracle Box to backup and restore your NVRAM data. However, Mtk Nvram Editor is more convenient and easy to use.
How to edit and repair your IMEI with Mtk Nvram Editor?
If you want to edit or repair your IMEI with Mtk Nvram Editor, you need to follow these steps:
Make sure you have backed up your original NVRAM data as mentioned above.
Launch Mtk Nvram Editor on your PC and click on the IMEI button.
Enter the IMEI number that you want to write or repair on your device. You can use online tools or apps to generate a valid IMEI number for your device.
Click on the Write button and wait for the tool to write or repair your IMEI number. You will see a message saying \"Write completed\" when it is done.
Reboot your device and check if your IMEI number is changed or repaired.
Note: You can also use other tools like Maui META Tool, SN Write Tool, or Chamelephon App to edit or repair your IMEI number. However, Mtk Nvram Editor is more reliable and effective.
How to edit and repair other NVRAM data with Mtk Nvram Editor?
Besides IMEI, you can also use Mtk Nvram Editor to edit and repair other NVRAM data on your MediaTek device, such as WiFi MAC address, Bluetooth address, barcode, serial number, etc. To do that, you need to follow these steps:
Launch Mtk Nvram Editor on your PC and click on the Other button.
Select the parameter that you want to edit or repair from the drop-down menu.
Enter the value that you want to write or repair on your device. You can use online tools or apps to generate a valid value for your parameter.
Click on the Write button and wait for the tool to write or repair your parameter. You will see a message saying \"Write completed\" when it is done.
Reboot your device and check if your parameter is changed or repaired.
Note: You can also use other tools like SN Write Tool, Chamelephon App, or Miracle Box to edit or repair other NVRAM data. However, Mtk Nvram Editor is more versatile and user-friendly.
How to fix common errors and issues with Mtk Nvram Editor?
Sometimes, you might encounter some errors or issues while using Mtk Nvram Editor on your PC or device. Here are some of the common errors and issues and how to fix them:
Error: Device not detected. Fix: Make sure you have installed the correct USB drivers for your device on your PC. You can download the USB drivers from this link: https://droidwin.com/download-imei-repair-nvram-files-for-mtk-mediatek-devices/
Error: Write failed. Fix: Make sure you have enabled USB debugging mode on your device. You can enable it by going to Settings > Developer options > USB debugging. If you don't see Developer options, go to Settings > About phone > Tap on Build number 7 times.
Error: Invalid IMEI or other parameter. Fix: Make sure you have entered a valid IMEI or other parameter value for your device. You can use online tools or apps to generate a valid value for your parameter.
Issue: No network signal or WiFi connection after writing or repairing IMEI or other parameter. Fix: Try rebooting your device and check if the issue is resolved. If not, try restoring your original NVRAM data as mentioned above.
If you still face any errors or issues with Mtk Nvram Editor, you can contact the developer of the tool or seek help from online forums like XDA.
How to use Mtk Nvram Editor with other tools and methods?
Mtk Nvram Editor is a standalone tool that can work independently on your PC and device. However, you can also use it with other tools and methods to enhance its functionality and compatibility. Here are some of the ways you can use Mtk Nvram Editor with other tools and methods:
You can use Mtk Nvram Editor with SP Flash Tool to flash or update your device's firmware or ROM. You can also use SP Flash Tool to backup and restore your device's entire data, including NVRAM data. You can download SP Flash Tool from this link: https://spflashtool.com/
You can use Mtk Nvram Editor with MTK Droid tools NVRAM to create or edit your device's scatter file, which is required for flashing or updating your device's firmware or ROM. You can also use MTK Droid tools NVRAM to backup and restore your device's IMEI and other NVRAM data. You can download MTK Droid tools NVRAM from this link: https://forum.xda-developers.com/t/tool-mtk-droid-tools-nvram-imei-backup-and-restore.2790281/
You can use Mtk Nvram Editor with TWRP Recovery to flash or update your device's custom ROM or kernel. You can also use TWRP Recovery to backup and restore your device's entire data, including NVRAM data. You can download TWRP Recovery for your device from this link: https://twrp.me/Devices/
You can use Mtk Nvram Editor with Miracle Box to flash or update your device's firmware or ROM. You can also use Miracle Box to backup and restore your device's IMEI and other NVRAM data. You can download Miracle Box from this link: https://miracleboxdownload.com/
By using Mtk Nvram Editor with other tools and methods, you can make the most out of this tool and your MediaTek device.
How to download and use Mtk Nvram Editor.rargolkesl?
Mtk Nvram Editor.rargolkesl is a modified version of Mtk Nvram Editor that has some extra features and fixes. It is a rar file that contains the executable file and some other files that are required for the tool to work properly. To download and use Mtk Nvram Editor.rargolkesl, you need to follow these steps:
Download the Mtk Nvram Editor.rargolkesl file from this link: https://trello.com/c/PaVKEpCI/22-mtk-nvram-editorrargolkesl
Extract the rar file using WinRAR or 7-Zip software.
Open the extracted folder and double-click on the Mtk Nvram Editor.exe file to run the tool.
Grant the necessary permissions and follow the instructions on the screen to use the tool.
Note: You can also download the original version of Mtk Nvram Editor from this link: https://droidwin.com/download-imei-repair-nvram-files-for-mtk-mediatek-devices/
What are the extra features and fixes of Mtk Nvram Editor.rargolkesl?
Mtk Nvram Editor.rargolkesl has some extra features and fixes that make it better than the original version of Mtk Nvram Editor. Some of them are:
It supports more MediaTek chipsets and devices.
It has a more user-friendly and intuitive interface.
It has a faster and more stable performance.
It has a better compatibility with other tools and methods.
It has fixed some bugs and errors that were present in the original version.
By using Mtk Nvram Editor.rargolkesl, you can enjoy a more enhanced and improved experience of editing and repairing your NVRAM data on your MediaTek device.
How to monitor radio and network parameters with Mtk Nvram Editor?
Mtk Nvram Editor can also help you to monitor your device's radio and network parameters, such as signal strength, network type, band, channel, etc. This can help you to troubleshoot any network issues or optimize your device's performance. To monitor your device's radio and network parameters with Mtk Nvram Editor, you need to follow these steps:
Launch Mtk Nvram Editor on your PC and click on the Monitor button.
Select the COM port that corresponds to your device and click Connect.
Wait for the tool to establish a connection with your device and display the radio and network parameters on the screen.
You can also click on the Log button to save the parameters to a text file for future reference.
To disconnect from your device, click on the Disconnect button.
Note: You can also use other tools like MTK Engineer tools or MobileUncle tools to monitor your device's radio and network parameters. However, Mtk Nvram Editor is more accurate and detailed.
How to modify other settings and options with Mtk Nvram Editor?
Mtk Nvram Editor has some other settings and options that you can modify to customize your tool and device. Some of them are:
You can change the language of the tool by clicking on the Language button and selecting your preferred language from the drop-down menu.
You can change the theme of the tool by clicking on the Theme button and selecting your preferred theme from the drop-down menu.
You can change the font size of the tool by clicking on the Font Size button and selecting your preferred font size from the drop-down menu.
You can enable or disable sound effects by clicking on the Sound button and toggling it on or off.
You can enable or disable auto backup by clicking on the Auto Backup button and toggling it on or off.
You can enable or disable auto restore by clicking on the Auto Restore button and toggling it on or off.
By modifying these settings and options, you can make Mtk Nvram Editor more suitable for your needs and preferences.
Conclusion
Mtk Nvram Editor.rargolkesl is a tool that can help you to edit and repair your NVRAM data on your MediaTek device. It can help you to change or fix your IMEI number, as well as other parameters like WiFi MAC address, Bluetooth address, barcode, serial number, etc. It can also help you to backup and restore your NVRAM data in case of any emergency. Furthermore, it can help you to monitor your device's radio and network parameters, and modify other settings and options of the tool and device. Mtk Nvram Editor.rargolkesl is a modified version of Mtk Nvram Editor that has some extra features and fixes that make it better than the original version. If you have a MediaTek device that has an invalid or corrupted NVRAM data, you should download and use Mtk Nvram Editor.rargolkesl to fix it. b99f773239
https://www.thibaultallo.com/group/mysite-231-group/discussion/73d39217-4273-48e4-8059-421faa0f8722
https://www.cpm-mo.com/group/mysite-group/discussion/a095186b-cbc5-4ef6-9ca9-e15ae5fd0349